350z // 370z // G35 // G37 // ALL VQ
CJM Fuel Line Adapter Fitting
This is a versitile fitting that can be used in mulitple locations on all VQ based engines by those building a custom fuel system. This 2 bolt flange can be found in various locations on all VQ based cars.
Use this fitting on the VQ35DE for:
-
It can be attached to the bracket mounted to the plenum on the passenger side, replacing the factory fuel line inlet, to allow full custom returnless plumbing up to this point.
-
It can also be attached on the rear of the passenger side rail for an alternative and cleaner returnless setup.
-
As in our Stage 0 Kit, it can be used on the back of the driver side fuel rail for a return system that uses all stock feed lines and fuel rails.
-
Use it on the back of BOTH rails for a custom feed and return system that uses your factory fuel rails.
Use this fitting on the VQ35HR for:
-
It can be attached to either the fuel rail feed pipe or directly onto the fuel rail to build a custom feed line to your OEM rails.
Use this fitting on the VQ37VHR for:
-
It can be attached to either the fuel rail feed pipe or directly onto the fuel rail to build a custom feed line to your OEM rails.
This product reuses the factory O-Ring from the replaced dampener.
